Seeing is believing.

Until now, antimicrobial coatings have been applied on a surface as an unnoticeable transparent barrier. After years of experience of formulating aesthetic water-based coatings in the automotive sector through our sister brand HydroSilex, our technicians managed to combine that technology with our current antimicrobial solution. This has resulted in a completely unique formulation that revolutionises surface protection and hygiene in the general marketplace. 

More than an antimicrobial coating, Nordic Chem 2.0 will create a highly repellent layer on the surface. Not only will it protect the substrate from harmful pathogens and contaminants, it will rejuvenate it, creating a whole new enhanced aesthetic look and also provide a smooth, clean feel to the skin at first touch. 

Nordic Chem 2.0 surface enhancement takes facility management to a whole new level and provides a gateway for commercial operators to be fully equipped as surface protection specialists. Each coat of the surface enhancer will provide additional layers of protection not only increasing hygiene but also extending and enhancing the life span of the substrate itself.

With Nordic Chem 2.0 seeing is believing and that’s exactly where the product stands firmly above the rest.

SEE THE CLEAN.

Textile

Textile is the most porous substrate that you will be faced with in a commercial environment. The results on textile are remarkable, due to the way the product bonds itself to each fibre. Contaminates will repel from fibres and remain superficially on the surface. This effect allows for quick and easy cleaning due to the prevention of contamination penetrating the full length of the fibre.

* Entire Surface Treated

Wood

Wooden substrates are one of the most common materials found in a commercial environment. Wooden surfaces are easily faded and worn due to abrasion and environmental damage. Nordic Chem 2.0 will absorb deep into the anchor pattern of wood and enhance the natural colours by rejuvenating from the inside out. Application on wooden surfaces such as chairs, tables and window sills have the biggest impact on visual enhancement and appeal after application of the coating.

* Treated | Untreated

Stone

Stone in many cases is a very porous substrate which can be made up of composites that range in hardness. It can chip and erode very easily as water and other contaminants absorb into the material. Nordic Chem 2.0 has been designed to bond composites and varying material types together on a nanoscale to increase durability and contaminate prevention.

* Treated | Untreated

FEEL THE CLEAN.

Tile

Tile, is in a similar category to brick in terms of its vulnerabilities. Tiles however are a smoother finish to the surface and therefore more susceptible to water marking and discoloring. The UV blocker in the coating is especially important on these applications as it prevents fading and discoloration to the tiles.

Glass

Glass can be an especially difficult surface to maintain due to its reflective qualities and is normally installed in hard to reach areas of commercial buildings. Nordic Chem 2.0 will fill the minute anchor pattern in glass to ensure a smooth and slick surface that repels dirt and grime. This results in the glass having extreme self cleaning properties which means less cleaning and maintenance.

Metal

Metallic surfaces are very time consuming to polish and are easily marked by fingerprints, oxidation and corrosion. Nordic Chem 2.0 has been found to have its biggest effect regarding time saving on the cleaning of  metallic surfaces. Some of the metals that have seen the biggest savings on cleaning have been brass, aluminum and frame work.

Cement

Cement substrates are used in flooring and facades as common practice in many commercial environments. These areas are subjected to the harshest of environments and contamination. Bacteria and fungi are a common occurrence in these areas. As these substrates are the foundation of a building, unhealthy concrete can lead to an unhealthy building. Nordic Chem 2.0 has the ingredients to not only terminate the existing contamination but prevent further damage and restore normal standards to this material.

Tile

Tile, is in a similar category to brick in terms of its vulnerabilities. Tiles however have a smoother finish to the surface and therefore are more susceptible to water marking and discoloring. The UV protection provided by our coating is especially important on these applications as it prevents from fading and deterioration.

Glass

Glass can be an especially difficult surface to maintain due to its reflective qualities and is normally installed in hard to reach areas of commercial buildings. Nordic Chem 2.0 will fill the nanoscopic pores in glass to ensure a smooth and slick surface that repels dirt, water and grime. This results in the glass having extreme self-cleaning properties which means less cleaning and maintenance required.

Metal

Metallic surfaces are very time consuming to maintain clean and are easily marked by fingerprints, oxidation, contaminants or corrosion. Nordic Chem 2.0 has been found to have its biggest effect regarding cleaning time saving on metallic surfaces. Some of the metals that have seen the biggest savings on cleaning have been brass, aluminum and frame work.

Cement

Cement substrates are used in flooring and facades as common practice in many commercial environments. These areas are subjected to the harshest of environments and contamination. Bacteria and fungi are a common occurrence in these areas. As these substrates are the foundation of a building, unhealthy concrete can lead to an unhealthy building. Nordic Chem 2.0 has the ingredients to not only terminate the existing contamination but prevent further damage and restore normal standards to this material.

Book a meeting!

+44 7305 075993